The research aircraft DO-128, call sign D-IBUF, of the IFF (TU Braunschweig) measures numerous meteorological and chemical variables to get a better understanding of the atmospheric processes which cause the development of precipitation. The aircraft starts from the Baden Airpark and flys among different flight pattern which are described in the flight protocols. The meteorological variables are static pressure and dynamic pressure at the nose boom, surface temperature, humidity mixing ratio by a lyman-alpha sensor, dewpoint temperature by a dewpoint-mirror, relative humidity by an aerodata-humicap, air temperature by a PT-100 sensor, vertical and horizontal wind components by a five-hole probe and GPS, turbulence (100 Hz), shortwave (pyranometer) and longwave (pyrgeometer) radiance in upper und lower half space. The chemical variables are mole fractions of ozone, carbon dioxide, carbon monoxide, nitrogen dioxide, nitrogen monoxide and nitric oxides (NOx). There are also a few variables for the position and the velocity of the aircraft stored in the data file. Additionally to the measurements by the aircraft, up to 30 drop-sondes can be dropped out of the aircraft. By using these sondes, vertical profiles of temperature, pressure, humidity and wind can be detected (see also the meta data describing the drop-sonde data). Special events are also marked in the data files by the event counter (e.g. dropping times of the drop-sondes, marks concerning the flight patterns etc.). The specific action or flight manoeuvre indicated by the event_number can be identified in the flight protocol.
Corsmeier, Ulrich; Wieser, Andreas (2012). cops_ado_data: data from research aircraft DO-128 run by FZK/IMK-TRO during COPS 2007. World Data Center for Climate (WDCC) at DKRZ. https://doi.org/10.1594/WDCC/cops_ado_data
SQA - Scientific Quality Assurance 'approved by author'
Result Date
2012-02-02
Technical Quality Assurance (TQA)
TQA - Technical Quality Assurance 'approved by WDCC'
Description
1. Number of data sets is correct and > 0: passed; 2. Size of every data set is > 0: passed; 3. The data sets and corresponding metadata are accessible: passed; 4. The data sizes are controlled and correct: passed; 5. The temporal coverage description (metadata) is consistent to the data: passed; 6. The format is correct: passed; 7. Variable description and data are consistent: passed
Method
WDCC-TQA checklist
Method Description
Checks performed by WDCC. The list of TQA metrics are documented in the 'WDCC User Guide for Data Publication' Chapter 8.1.1
[1] DOIWulfmeyer, V.; Flamant, C.; Behrendt, A.; Blyth, A.; Brown, A.; Dorninger, M.; Illingworth, A.; Mascart, P.; Montani, A.; Weckwerth, T. (2011). Advances in the understanding of convective processes and precipitation over low-mountain regions through the Convective and Orographically-induced Precipitation Study (COPS). doi:10.1002/qj.799
[2] DOIWulfmeyer, V.; Flamant, C.; Behrendt, A.; Blyth, A.; Brown, A.; Dorninger, M.; Illingworth, A.; Mascart, P.; Montani, A.; Weckwerth, T (Eds.). (2011). Special Issue: Advances in the understanding of convective processes and precipitation over low-mountain regions through the Convective and Orographically-induced Precipitation Study (COPS). doi:10.1002/qj.v137.1s
Parent
cops_ado: contains data from DO-128 Aircraft during COPS Campaign